Home > Windows Xp > Windows XP Pro SP2 Error With SATA - RAID Drives

Windows XP Pro SP2 Error With SATA - RAID Drives

Contents

rcleavittApr 17, 2010, 2:38 AM I had a similar situation awhile back!BIOS sees it; Windows doesn't!Hours and hours of frustration finally led me to Tweakui where I discovered that the two So, all you need is just to add (intergrate) your particular driver to the long list of "default" drivers. 4. At his stage you would hopefully be able to browse the drive and retrieve your files. How shall I do it. http://newsgrouphosting.com/windows-xp/windows-xp-and-sata-raid-driver-not-loading-and-not-working.php

WinXPPro start up disks get me to Install WinXP hit enter, then no hd detected. In case you have a 64bit OS, copy MSM64.exe instead. Then break and re-create the array, and not try to fix it the way it is. January 30, 2008 Malou Escasa For those who are afraid to try this, well, I was able to get rid of Vista; set up XP (incomplete drivers); restore Vista in its look at this site

Setup Did Not Find Any Hard Disk Drives Installed In Your Computer Windows Xp

You can try to update InCD to the latest version. After that, it asks for a second reboot. and sorry for being such a n00b.. UPDATE My South Bridge is an Intel(r) ICH10R.

  • Mar 8, 2005 #9 Tarkus TechSpot Ambassador Posts: 621 Silicon Image 3112 drivers RAID it's version 1.0.0.51 now, the older drivers 1.0.0.28 and earlier caused data corruption.
  • Enter the BIOS and check if the drive is detected in system information.
  • Terms of Use Privacy Policy Licensing Advertise International Editions: US / UK India Login _ Social Sharing Find TechSpot on...

Fist I can't set to IDE mode, but after I update my BIOS, I can. Reply prasanth says: September 20, 2011 at 15:07 Hey guys my system recently formated after that my display driver got some problem, while browsing its freeze and system automatically restarts,,pls help It asks me for the installing preferences (shortcut and whatever) 3. Windows Xp Install Not Detecting Hard Drive Because XP doesn't use those drivers until later in the boot process.

So specific questions:1) How does one know what drivers should be updated?2) Could old drivers be preventing the Windows pack 3 from downloading (it also says it couldn't download the "catalog Windows Xp Install Can't Find Hard Drive Yes you can. (sorry). If they had more expert status they probably wouldn't be here asking for help. By default, this file is located in the C:\Windows folder.

It works better as it starts to load drivers from CD, etc. Hard Drive Not Detected While Installing Windows 7 Two of them are grouped together and one is sort of on its own on the side of the motherboard. Network connections missing Possible symptoms: The LAN or High-Speed Internet connection icon is missing. how to change this??

Windows Xp Install Can't Find Hard Drive

BIOS has always been configured in IDE mode. https://www.raymond.cc/blog/install-xp-setup-did-not-find-any-hard-disk-drives-installed-in-your-computer/ Good luck! Setup Did Not Find Any Hard Disk Drives Installed In Your Computer Windows Xp Try obtaining a new installer file from the application author." I tried to install a similar CD and that same error occurred, but the place gave me a brand new computer Setup Did Not Find Any Hard Disk Drives Installed In Your Computer Server 2003 nathan March 10, 2008 Andy Grateway-Thanks you verry much for your help.

Please help!!!!!!!!!!!!!!!! 🙁 Reply Victor Bird says: September 9, 2012 at 10:54 Thanks a lot for a post. this contact form This article explains step by step, how to install Windows XP with builtin F6 floppy drivers for AHCI/RAID disk using USB thumbdrive only. I do not have the option to change ACHI to IDE. A lot of those people use an Intel chipset, therefore an Intel SATA controller (built into the chipset), therefore iaStor.sys. Setup Did Not Find Any Hard Disk Drives Windows 7

when i write 1, i get a list of commands and i have no idea where to go from here. Plugged it into the IDE port on the MB, erased the data on it, and still the exact same error. Secondly make sure that you use the IDE cable with the blue, black and grey connector and not any of the other cables. http://newsgrouphosting.com/windows-xp/windows-xp-pro-ignores-my-2-sata-drives.php December 15, 2007 Sonia Thomas Hi, My laptop recently fell down and the hard drive got damaged and i had to replace it.

Thank you for the tip. Sata Hard Disk Drivers For Windows Xp Download If you click the Advanced menu and then click Advanced Settings, only the [Remote Access connections] entry appears in the Connections list. I changed the mode from AHCI to IDE, rebooted the computer and I was able to login and my issue was resolved.

R.

Join the community here. Thanks again January 30, 2008 Malou Escasa My hero! i really need this help please help out as soon as possible November 28, 2007 Brandon How do I know which drivers I need to download? External Hard Disk Not Detected In Windows Xp All my registry permission problems were gone. 2005-08-06 – Travis Leedahl wrote (slightly edited to adapt to style): After performing a repair installation of Windows XP I could not reinstall Service

This part at the end of the line should now read: /NoExecute=AlwaysOff Close the editor and resave the BOOT.INI file back to where it was. select "Update driver..." d. You can set it to IDE mode. Check This Out they work. 100% all channels.

A: Yes, you need to enable AHCI mode for your SATA controller, or optionally enable RAID features. Thanks a bunch! A: Some motherboards have multiple SATA controllers. Reinstall the matching graphics adapter driver.

I was using the ICH9 driver while I should've been using the ICH8R/ICH9R one. Reply Sripal says: September 17, 2013 at 02:28 Thank You Xavier…It works for compaq presario Reply Keith says: February 20, 2010 at 19:50 Fair play brilliant work sir. I have followed the instruction i found on th website but yet still it cant load the Xp and this has been bodering me cuz i need to download some application Activate the following two settings: Allow Active content to run files on my computer Allow Active content from CDs Error 0xC0000135 winsrv was not found Read the following Microsoft Knowledge Base

Other manufacturers, if affected, will follow suit. Can you help me out please? Run Bart's PE Builder. I have issue in installing win 2003 on gateway model M-6750-with disk WDC WD 2500BEVS (product id=89578-oem-7332157-00141).setup don't have choice for changing HD SATA and I am Not able to get

Once you proceed to the next screen, now we can finally finish the process. Also, doing so means you are going to have a much slower computer than if you properly fix the error by using the right drivers. Also remember to set the one drive as master and the other as slave and plug the grey connector into the master and the black connector into the slave and the And i think other people who have HP notebook having same problem.

windows-xp drivers reinstall ahci share|improve this question edited Sep 27 '12 at 16:26 asked May 22 '12 at 8:59 Mister Smith 4003822 1 Hmm?