XP Pro Cannot See My 120GB SATA Drive When Using A PCI Controller
It was very frustrating to do, but it is working fine now. Reply Geoffrey says: January 5, 2009 at 10:25 am This guide helps even those who are good at computers. Every one knows what they are capable of!!! Rebuilding a Relic for my Kids. http://newsgrouphosting.com/hard-drive/won-t-see-sata-2-drive.php
Killer app dude, I thank you Dmitry, great work.Glenn on June 3, 2008 8:10 am Hi, the HDD Capacity Restore Tool was able to fix my "only 33gb with Are these two types equally reliable? Can that connector reach the DVD drive? I have my HDTV and my monitor set up to my computer.
How To Connect Ide Hard Drive To Sata Motherboard
But, when I try to boot to Windows I just get a black screen that says "No Boot Device Available. There are no jumpers to worry about on SATA drives. Great things to have around. #6 sm625, Jan 11, 2012 mfenn Elite Member
Moderator Sabb Super Moderator Joined: Jan 17, 2010 Messages: 22,403 Likes Received: 0 SATA gets it's own channel and, as of this date, SATA DVD drives are very uncommon.
After restart the first action is to new install the drive. It has something to do with Samsung Boot Manager. Please attach the hard drive to an IDE or SATA connector on the motherboard…Dmitry Postrigan on November 20, 2007 8:53 pm Thanks for the tool, my 1TB WD10EACS was Ide Hard Drive Jumper Settings in the device manager..the pc runs like a champ....is this a problem i can just ignore??
The Hard Drive only came with a CD, no floppy disk. Sata And Ide Hard Drives Together Problem arises when the system is running the operating system boots. If you don't like it, change it to some letter not already in use. There are two things to keep in mind, do not overload your power supply or strange difficult problems will begin to occur and make the correct BIOS settings for your data
Master and Slave only have meaning for the IDE channels, and do NOT establish how booting is done. How To Make Ide Boot Instead Of Sata How can i resolve the problem ? Can I temporarily use a cd rom IDE to run the second hard drive on? I do not, however, have a long enough power cable for the new HD.
Sata And Ide Hard Drives Together
i guess he could terms for you guys like FLIP ON AND OFF SWITCHES ON BACK OF METAL HUMMING BOX…. I haven't tried it yet, but don't want to be tweaking BIOS settings if i don't have to. How To Connect Ide Hard Drive To Sata Motherboard This was more than enough to help even the Lowest level of expearance Swap or add a hard drive!!! Ide And Sata Drives In Same Computer Your drive already has been seen by the computer and your just putting it inside.
Page 1 of 5 1 23 > Last » Show 40 post(s) from this thread on one page Copyright ©2000 - 2017 Products Where to Buy Support Company Blog Restoring Factory http://newsgrouphosting.com/hard-drive/xp-refuses-to-boot-up-after-installing-new-sata-drive.php This was not necessary - but the error dialogue in the next version of the software should ask users to check that the drive is a) on its own channel and Set the ATA Mode to PATA + SATA, both types to Keep Enabled - Yes, PATA Channel Selection to Primary, Combined Mode Option to PATA 1st Channel. Can u please guide me/help me to install the new system. Motherboard With Ide And Sata Ports
Look through this forum for posts on Partition Recovery and Data Recovery. Since you are using the first (Primary) IDE channel, it MUST have a Master. Note: the SATA is a Samsung drive, and using the tool ESTOOL, I changed it from SATA II to SATA 1.5) The IDE cable isn't long enough to reach the DVD this contact form The W2K also detected the new drive when I try check in the ‘device manager'.
It did read 60 gigs at first before I cloned my other 40 gig drive to the 60 gig drive.
If not - if it is there and NOT having trouble - then the thing we need to fix is not the drive, but the way the BIOS handles all the to the first or to the second one?what will happen to my data? Thanks for the easy to follow instructions. How Many Hard Drives Can Be Connected To A Single Ide Cable This post has been flagged and will be reviewed by our staff.
I think connecting it to a Win XP SP2 laptop via an old Maxtor OneTouch I USB enclosure was to blame. Muchas gracias… I use this program with exit, one samsung disk 250gb, who only have 137gb, and the program restore 250 gb capacity. I suspect that's how it is set now because you succeeded in getting your SATA drive to work. navigate here I need help though please help me. [emailprotected] i plugged everything nice and snug.
My SATA cable is now connected to both my internal HD and the new HD I have just put in, and it then goes to the motherboard. Here's a write-up by Microsoft about the utility and how to use it: http://support.microsoft.com/?kbid=313348 Jan 30, 2005 #3 (You must log in or sign up to reply here.) Show Ignored When run, a messagebox comes up saying "Error accessing device" and then another one with "Cannot change Visible in OnShow or OnHide." Then the program starts up, but all main windows If the drives are not being recognized, check that both power and data cables are in tightly (including the motherboard end for the data cables), and that the jumpers are set
So, I unplugged the SATA drive, rebooted again, and still got the BSOD. When running more than one OS on multiple drives you can use this option, or if running a properly installed NT/2000/XP, you can add boot options into the boot.ini. If the SATA drive is the only drive in the IDE motherboard system and therefore the primary drive, does the adapter & SATA combination permit booting as normal?Click to expand... Get the answer tosh9iAug 20, 2009, 4:34 PM Well, all due to the fact that I chose a wrong boot image file, I was unable to bootup using the slipstreamed windows
Why did WD say 320 on the hard drive when in reality it's only 298gb. If you did use a controller card, it will pop up a screen showing the name of the card and any drives it has detected. Should i just go ahead with formatting it as a removable drive? Yes, my password is: Forgot your password?
PC/Laptop manufacturer creates HPA Manufacturer of your PC can create a "Host protected area" on your hard drive to store an image of the original operating system and programs. Please reply, greatly appreciate your time. OK, then RIGHT-click on the Partition on the Samsung and choose to Delete the Partition. SWEET !western digital 1TB on April 5, 2008 3:36 am What if I have a Hitachi/IBM harddrive that is a 60GB (can be read on the label with the
You had to do this because the slipstreamed XP Install Disk with SP3 was faulty and could not install. Run this procedure.Step 3: RIGHT-click again on the new Partition you just created and choose to Format it.