Home > Blue Screen > Windows XP Crashes On Loading Screen With SATA Plugged In

Windows XP Crashes On Loading Screen With SATA Plugged In


At the beginning of 2005, a friend installed a new harddrive for me, 250GB, which replaced the 20GB. (The 20GB is no longer in there.) The 250GB drive shows up in michael Report stan› dusty - Nov 28, 2008 at 09:16 AM Thanks Dusty, I had to set the jumper from CS to maaster and it worked. The IDE HD had to be on the secondary IDE cable in order for it to be recognized by the sata drive. By the way, what are the short pci express slots for? Source

Start windows in safe mode, press F8 usually during startup - I had to turn my monitor off and on again to see the screen a second at a time, and After... Followed your advice about the jumpers and as if by magic Windows could be re loaded. Place in the freezer for an hour or so. http://www.techspot.com/community/topics/windows-xp-crashes-on-loading-screen-with-sata-plugged-in.47098/

Windows Xp Blue Screen Fix

RMA with WD will probably just make me lose it. 05-19-2011, 05:26 PM #7 CrazyPerson Registered Member Join Date: May 2011 Posts: 4 OS: Windows 7 64-bit I Once I plugged the hdmi back in my reboot was normal. The hard drive just vanishes while I am using the computer. Both cables were DVI, but I read somewhere a guy fixed this by buying a new DVI cable and I had a second one laying around.

If you can not boot windows at all, then you can try to fix the boot.ini file: Boot to c: Then type in the following: CD\ ATTRIB -H C:\boot.ini ATTRIB -S The problem then escalated when the computer refuses to start. Sorry for my bad english, hope everybody understand this (and hope I help somebody). Blue Screen Flashes And Reboots Windows 7 I do have another external drive with 1TB available so I should be able to transfer the files that way if either method works.

I tried to start in in safe mode and that only made it freeze up really good. Windows Xp Blue Screen On Startup I think it happens because it is trying to seek the drive but eventually fails.My motherboard is a Biostar n61pb-m2s (MCP6P M2+) and is using Phoenix Award BIOS. This indicated that the card could not detect that something was plugged into either output of the card and therefore got confused. http://ccm.net/forum/affich-28196-xp-startup-prob-blue-screen-reboot-repeat by RJSheppard / July 23, 2005 1:30 AM PDT In reply to: Mixing SATA and IDE drives in a system?

You are not sure the drive isn't corrupted. Blue Screen On Startup Windows 7 The Hard-drive will appear again only at the: Control Panel-->Administrative Tools->Computer Management->Storage application. I have been running a SATA drive as my primary drive with OS and programs and 2 IDE drives for data storage. Didn't work, there is like one thing in the device manager listed as Unknown Device under the other devices tab and I'm wonder if that the hard drive that it is

  • So no crashes or anything, just no display output.
  • I tried going into Safe Mode like they said but I can't find the any of those Drivers...
  • I've looked all over but couldn't find anything related to this issue online.I finally read your post and remembered that was how I had altered it before(accidentally, about a year and

Windows Xp Blue Screen On Startup

Flag Permalink This was helpful (0) Collapse - mixing of sata and ide by Ranjan_Ind001 / July 22, 2006 9:23 PM PDT In reply to: Mixing SATA and IDE drives in http://www.computing.net/answers/hardware/sata-hdd-recognized-by-bios-but-hangs-windows/76499.html Hope this solution will work for other people. Windows Xp Blue Screen Fix That will show if there is a drive issue. Blue Screen Error In Windows Xp Installation in this case, type in 1 then enter.

got to the checking IDE drive 0 something 182gb... http://newsgrouphosting.com/blue-screen/blue-screen-errors-and-crashes-to-desktop-please-help.php It was driving me crazy. However, plugging the drive into power appears to cause the drive to still spin up. The following day as I switched it back on, the computer would display the chipset logo and freeze. How To Fix Blue Screen Windows Xp Without Cd

I changed my pcie settings from 32bit to 64bit and now it works fine. You need to change that selection, if that is happening. Report swee- Mar 29, 2010 at 07:44 AM Hey my computer keep restart saying installation and it kept restart and ask me to press f8 and go safe mode to repair have a peek here Who thinks " Hey it's broke what the heck let's throw it in the freezer and see what happens?"Likely Report • #7 jefro March 29, 2011 at 12:34:27 http://www.cgsecurity.org/wiki/Test...NOT knoppix."The era

Improve speed at all? Blue Screen Error In Windows Xp Physical Memory Dump I have two SATA drives as my main drives, and I have two IDE drives (one refuses to operate), so I installed the one IDE drive into my system, and have The secondary drive shows up on the device manager and bios, but does not appear in my windows explorer.

I am currently running a Maxtor 200GB SATA drive as the master and a Maxtor 120GB IDE drive as the slave.

But, I do not have nvidia, I`ve ati gpu and asus board. Installed windows great. SATA drives are hot swappable so you could try connecting the power cable only, and booting. Windows Xp Blue Screen Unmountable Boot Volume No, create an account now.

no problems at all. If it works it would have saved me hours of data transfers. All Rights Reserved Tom's Hardware Guide ™ Ad choices Search Sign Up Log In Home Forum How To Download News Encyclopedia High-Tech Health Sign Up Language English Español Deutsch Français Italiano Check This Out I can't get past the POST when the HDD is plugged in; if I remove the HDD, the PC boots normally.

I PLUG THE HUB BACK INTO THE SIDE OF THE NOTEBOOK, SIGN IN, & BOOT INTO MY USER NO PROBS. I can tell Windows still continues to load because I can hear the startup sound from my speakers and the harddisk activity looks normal too. If someone can recommend a data recovery company in British Columbia, Canada, from the list that Western Digital gives here instead of solutions, that would be just as good as any Report bryon- Oct 5, 2008 at 01:10 AM Hi, This fixed it for me also.

after this I suggest you take a cup of coffee and wait coz its gona be a long process which the pc is gona do all by itself. Flag Permalink This was helpful (0) Collapse - It's fine by ackmondual / July 22, 2005 11:48 AM PDT In reply to: Mixing SATA and IDE drives in a system? Could use a network drive if you have a home network. Helpful +9 Report Darrian Nov 30, 2008 at 07:11 AM well I had the same problem I pushed the on/off button a few times and windows poped up, so give it

I have not used this computer for the past couple of years, and the few times I've tried to turn it on recently, I get a blue screen that reads: STOP: